基本照明プラン
Standard Lighting Plan- 表示価格は全て税抜きです。
全機材プラン
Rent-all Plan- 表示価格は全て税抜きです。
有償レンタル
Paid Rental- 表示価格は全て税抜きです。
背景布・ペーパー
Backdrops & Paper- 表示価格は全て税抜きです。
Standard Lighting Plan
基本照明プラン
~¥1,000 /h (excl. tax)
・プランご利用時に、機材を使用いただかなくとも課金対象となります。
・プラン以外の機材をご希望の場合、リスト上に表記されるレンタル料金(1回)が発生いたします。
・表記は消費税抜価格です。
・各種料金は予告なく変更する場合がございます。
Hollyland LARK 150 2-Person Compact Digital Wireless Microphone System (2.4 GHz, Black)
¥1,500
Add a pair of compact, clip-on wireless microphones for your two-person interview, YouTube video, documentary production, or vlog with the black LARK 150 2-Person Compact Digital Wireless Microphone System from Hollyland. The LARK 150 features two ultracompact microphone transmitters and a receiver that offer a portable, cost-effective, all-inclusive solution for recording two subjects at once to your camera, smartphone, audio recorder, or similar device with a 3.5mm input jack
The tiny transmitters feature built-in omnidirectional microphones and weigh less than 1 oz each, making them easy to clip onto shirt and lapel collars for quick interviews. The integrated mics offer an anti-vibration design with intelligent noise cancellation to ensure outstanding sound quality and clear, intelligible audio. For a more discreet appearance, you can use the included lavalier microphones and plug them into the 3.5mm input ports on the transmitters. The transmitter's power button doubles as a two-way mute button with a short press.
The two-channel receiver clips to your camera shoe and features easy-access volume knobs, a 3.5mm headphone monitoring output, a 3.5mm line output, and an easy-to-read OLED screen that shows the connection and battery status of all three units along with metering for audio levels.
The system uses automatic frequency selection with FHSS (Frequency Hopping Spread Spectrum) technology in the 2.4 GHz bandwidth to ensure a clean signal without interference or dropouts at a range of to 328' line of sight and 65' with limited obstacles. The receiver also supports switchable safety, stereo, and mono modes for different configurations and a low latency rate of 5ms.
Both the transmitters and the receiver feature built-in rechargeable batteries. The transmitters will each run up to 4 hours, while the receiver offers up to 7.5 hours of operating time; this means that for single-person shoots, the second transmitter can be used to extend your shooting time if necessary. The included storage and transport case automatically pairs the components and recharges them in 2.5 hours using its USB input port.
A USB cable, 3.5mm TRS audio cable, 3.5mm TRRS cable, two furry windscreens for the lavalier mics, and a storage bag are also supplied with the Lark 150. The system can be expanded with additional transmitters and receivers (available separately) to accommodate up to 8 wireless mics on set at one time.
Professional Sound Quality
Stable Wireless Audio Transmission
Mono/Stereo/Safety Output Modes
- Mono: Record a single microphone to both audio tracks in your camera or phone
- Stereo: Record two mics, with each on a separate track
- Safety: Record a single mic at a lower level on a separate track as a backup if main track is too loud
Ultracompact Construction
Additional Features
Rent-all Plan
全機材プラン
~¥3,500 /h (excl. tax)
・カメラ・レンズ、バッテリーは有償レンタルとなります。予めご了承ください。
・プランご利用時に、機材を使用いただかなくとも課金対象となります。
・プラン以外の機材をご希望の場合、リスト上に表記されるレンタル料金(1回)が発生いたします。
・表記は消費税抜価格です。
・各種料金は予告なく変更する場合がございます。
Hollyland LARK 150 2-Person Compact Digital Wireless Microphone System (2.4 GHz, Black)
¥1,500
Add a pair of compact, clip-on wireless microphones for your two-person interview, YouTube video, documentary production, or vlog with the black LARK 150 2-Person Compact Digital Wireless Microphone System from Hollyland. The LARK 150 features two ultracompact microphone transmitters and a receiver that offer a portable, cost-effective, all-inclusive solution for recording two subjects at once to your camera, smartphone, audio recorder, or similar device with a 3.5mm input jack
The tiny transmitters feature built-in omnidirectional microphones and weigh less than 1 oz each, making them easy to clip onto shirt and lapel collars for quick interviews. The integrated mics offer an anti-vibration design with intelligent noise cancellation to ensure outstanding sound quality and clear, intelligible audio. For a more discreet appearance, you can use the included lavalier microphones and plug them into the 3.5mm input ports on the transmitters. The transmitter's power button doubles as a two-way mute button with a short press.
The two-channel receiver clips to your camera shoe and features easy-access volume knobs, a 3.5mm headphone monitoring output, a 3.5mm line output, and an easy-to-read OLED screen that shows the connection and battery status of all three units along with metering for audio levels.
The system uses automatic frequency selection with FHSS (Frequency Hopping Spread Spectrum) technology in the 2.4 GHz bandwidth to ensure a clean signal without interference or dropouts at a range of to 328' line of sight and 65' with limited obstacles. The receiver also supports switchable safety, stereo, and mono modes for different configurations and a low latency rate of 5ms.
Both the transmitters and the receiver feature built-in rechargeable batteries. The transmitters will each run up to 4 hours, while the receiver offers up to 7.5 hours of operating time; this means that for single-person shoots, the second transmitter can be used to extend your shooting time if necessary. The included storage and transport case automatically pairs the components and recharges them in 2.5 hours using its USB input port.
A USB cable, 3.5mm TRS audio cable, 3.5mm TRRS cable, two furry windscreens for the lavalier mics, and a storage bag are also supplied with the Lark 150. The system can be expanded with additional transmitters and receivers (available separately) to accommodate up to 8 wireless mics on set at one time.
Professional Sound Quality
Stable Wireless Audio Transmission
Mono/Stereo/Safety Output Modes
- Mono: Record a single microphone to both audio tracks in your camera or phone
- Stereo: Record two mics, with each on a separate track
- Safety: Record a single mic at a lower level on a separate track as a backup if main track is too loud
Ultracompact Construction
Additional Features
Paid Rental Equipment
有償レンタル機材
¥3,000~/day (excl. tax)
・機材を予約されますと、ご使用いただかなくとも課金対象となります。
・リスト上に表記されるレンタル料金(1回)が発生いたします。
・表記は消費税抜価格です。
・各種料金は予告なく変更する場合がございます。
Hollyland LARK 150 2-Person Compact Digital Wireless Microphone System (2.4 GHz, Black)
¥1,500
Add a pair of compact, clip-on wireless microphones for your two-person interview, YouTube video, documentary production, or vlog with the black LARK 150 2-Person Compact Digital Wireless Microphone System from Hollyland. The LARK 150 features two ultracompact microphone transmitters and a receiver that offer a portable, cost-effective, all-inclusive solution for recording two subjects at once to your camera, smartphone, audio recorder, or similar device with a 3.5mm input jack
The tiny transmitters feature built-in omnidirectional microphones and weigh less than 1 oz each, making them easy to clip onto shirt and lapel collars for quick interviews. The integrated mics offer an anti-vibration design with intelligent noise cancellation to ensure outstanding sound quality and clear, intelligible audio. For a more discreet appearance, you can use the included lavalier microphones and plug them into the 3.5mm input ports on the transmitters. The transmitter's power button doubles as a two-way mute button with a short press.
The two-channel receiver clips to your camera shoe and features easy-access volume knobs, a 3.5mm headphone monitoring output, a 3.5mm line output, and an easy-to-read OLED screen that shows the connection and battery status of all three units along with metering for audio levels.
The system uses automatic frequency selection with FHSS (Frequency Hopping Spread Spectrum) technology in the 2.4 GHz bandwidth to ensure a clean signal without interference or dropouts at a range of to 328' line of sight and 65' with limited obstacles. The receiver also supports switchable safety, stereo, and mono modes for different configurations and a low latency rate of 5ms.
Both the transmitters and the receiver feature built-in rechargeable batteries. The transmitters will each run up to 4 hours, while the receiver offers up to 7.5 hours of operating time; this means that for single-person shoots, the second transmitter can be used to extend your shooting time if necessary. The included storage and transport case automatically pairs the components and recharges them in 2.5 hours using its USB input port.
A USB cable, 3.5mm TRS audio cable, 3.5mm TRRS cable, two furry windscreens for the lavalier mics, and a storage bag are also supplied with the Lark 150. The system can be expanded with additional transmitters and receivers (available separately) to accommodate up to 8 wireless mics on set at one time.
Professional Sound Quality
Stable Wireless Audio Transmission
Mono/Stereo/Safety Output Modes
- Mono: Record a single microphone to both audio tracks in your camera or phone
- Stereo: Record two mics, with each on a separate track
- Safety: Record a single mic at a lower level on a separate track as a backup if main track is too loud
Ultracompact Construction
Additional Features
Backdrops & Background Paper
背景布・ペーパー
¥4,000~/day (excl. tax)
・料金にはセットアップも含まれております。
・予約されますと、ご使用いただかなくとも課金対象となります。
・リスト上に表記されるレンタル料金(1回)が発生いたします。
・表記は消費税抜価格です。
・各種料金は予告なく変更する場合がございます。
Hollyland LARK 150 2-Person Compact Digital Wireless Microphone System (2.4 GHz, Black)
¥1,500
Add a pair of compact, clip-on wireless microphones for your two-person interview, YouTube video, documentary production, or vlog with the black LARK 150 2-Person Compact Digital Wireless Microphone System from Hollyland. The LARK 150 features two ultracompact microphone transmitters and a receiver that offer a portable, cost-effective, all-inclusive solution for recording two subjects at once to your camera, smartphone, audio recorder, or similar device with a 3.5mm input jack
The tiny transmitters feature built-in omnidirectional microphones and weigh less than 1 oz each, making them easy to clip onto shirt and lapel collars for quick interviews. The integrated mics offer an anti-vibration design with intelligent noise cancellation to ensure outstanding sound quality and clear, intelligible audio. For a more discreet appearance, you can use the included lavalier microphones and plug them into the 3.5mm input ports on the transmitters. The transmitter's power button doubles as a two-way mute button with a short press.
The two-channel receiver clips to your camera shoe and features easy-access volume knobs, a 3.5mm headphone monitoring output, a 3.5mm line output, and an easy-to-read OLED screen that shows the connection and battery status of all three units along with metering for audio levels.
The system uses automatic frequency selection with FHSS (Frequency Hopping Spread Spectrum) technology in the 2.4 GHz bandwidth to ensure a clean signal without interference or dropouts at a range of to 328' line of sight and 65' with limited obstacles. The receiver also supports switchable safety, stereo, and mono modes for different configurations and a low latency rate of 5ms.
Both the transmitters and the receiver feature built-in rechargeable batteries. The transmitters will each run up to 4 hours, while the receiver offers up to 7.5 hours of operating time; this means that for single-person shoots, the second transmitter can be used to extend your shooting time if necessary. The included storage and transport case automatically pairs the components and recharges them in 2.5 hours using its USB input port.
A USB cable, 3.5mm TRS audio cable, 3.5mm TRRS cable, two furry windscreens for the lavalier mics, and a storage bag are also supplied with the Lark 150. The system can be expanded with additional transmitters and receivers (available separately) to accommodate up to 8 wireless mics on set at one time.
Professional Sound Quality
Stable Wireless Audio Transmission
Mono/Stereo/Safety Output Modes
- Mono: Record a single microphone to both audio tracks in your camera or phone
- Stereo: Record two mics, with each on a separate track
- Safety: Record a single mic at a lower level on a separate track as a backup if main track is too loud
Ultracompact Construction
Additional Features
How to use the Pholsy Universal Wireless Flash Trigger
Pholsyユニバーサルワイヤレスフラッシュトリガーの使用方法
¥500/day(税抜)
照明プランをお使いいただく際、フラッシュトリガーをお持ちでなければ、ワイヤレストリガーのご利用をお勧め致します。
ご利用の際にはスタッフまでお声がけ下さい。
If you do not have a flash trigger when using any studio lights, we recommend using a wireless trigger.
Please ask our staff if you wish to use this device.
Pholsyトランスミッターとカメラのセットアップ
- Pholsyトランスミッターをカメラのホットシューマウントにスライドさせます。
- ロックリングをきつくなるまで回してください。
- カメラ、トランスミッターの順に電源を入れ、撮影モードをマニュアルに設定します。
- トランスミッターがチャンネル1であることを確認します。
Pholsyトランスミッターでスタジオ照明のセットアップ
- すべての照明がチャンネル1にあることを確認してください。
- 次に、どのライトをメインまたは「マスター」ライトにするかを決定する必要があります。
- 次に、S1/S2 ボタンを1回押して、他のライトを「スレーブ」モードに設定します。(これは、選択した「マスター」ライトのタイミングに合わせて消灯することを意味します）。
- 3.5mmミニジャックを受信機のFLASHポートに接続し、オンになっていることを確認します。
- ミニジャックのもう一方の端を、「マスター」ライトの背面にあるSYNCポートに接続します。*接続したまま、受信機を背面からぶら下げることができます。
[注意】ポートに入らない場合は、間違ったケーブルを使用している可能性があります。ポーチの中に見当たらない場合は、スタッフにお尋ねください。
セットアップのテスト
両方の手順が完了したら、カメラに戻って送信機のTESTボタンを押してください。すべてのライトが同時に消灯するはずです。その後、通常通りカメラを使用することができるはずです。
上記の手順をすべて完了しても、ライトが同時に消灯しない場合は、スタッフにご相談ください。
Setup the camera with Pholsy Transmitter
- Slide the Pholsy transmitter into the camera’s hot shoe mount.
- Turn the locking ring until tight.
- Turn on the camera, then transmitter; set the shooting mode to Manual.
- Confirm that the transmitter is on Channel 1.
Setup the studio lights with Pholsy Transmitter
- Make sure that all lights are on Channel 1.
- Next you need to decide which will be the main or “master” light.
- Then set the other lights to “slave” mode by pressing the S1/S2 button once. (This means they will go off to the timing of the “master” light you selected.)
- Connect the 3.5 mm mini-jack into the FLASH port on the receiver and make sure it is on.
- Connect the other end of the mini-jack into the SYNC port on the back of the “master” light. *You can just let the receiver hang off the back while it’s connected.
[Keep in mind] If it’s not going in the port, you may be using the wrong cable. Check the pouch, it should be there. If not, please ask one of the staff.
Test the setup
After you’ve completed both steps, go back to your camera and hit the TEST button on the transmitter. All lights should go off at the same time. Then you should be able to use the camera like normal.
If you’ve completed all the steps above, and the lights are still not going off together, please ask one of our staff for further assistance.
